ISX Metal Machinery Equipment & Supplies Exchange Listings

Quantity	Units	Frequency
500	each	Month
Price	Funds	Per Unit
2200	USD	each

Other Machinery and Equipment - RW Air operated double diaphragm pump. Air powered diaphragm pump The air operated double diaphragm pump is the new conveying/transportation machinery /equipment using compressed air as the power source. Air distribution valves canceled traditional O type ring and cylindrical valve structure, using three-way operated, eliminating the valve dead center and pump stop phenomenon. Accurate and reliable directional signal avoid stop, and faster reversing leads to larger flow rate, which makes pulse smaller, more stable flow. It can pump various corrosive, volatile, flammable, poisonous liquids, even fluids with particles and high viscosity. Pump inlet /outlet diameter: 06mm (1/4inch), 10mm(3/8inch), 15mm(1/2inch), 20mm (3/4inch), 25mm(1inch), 40mm(1.5inch), 50mm (2inch), 80mm(3inch), 100mm(4inch) Pump body material: Acetal, PP, Aluminum alloy, Stainless steel (SS304, SS316), PVDF, Ductile iron Diaphragm material: Hytrel, Santoprene, PTFE, Buna N, Viton, Geolast Valve ball, valve seat material Acetal, PP, Aluminum alloy, SS304, SS316, Hytrel, PVDF, PTFE, Buna N, Vition, Geolast Main application: Chemical, petrochemical, paint, ceramics, metallurgy, environmental protection and medicine etc.

Quantity	Units	Frequency
500	each	Month
Price	Funds	Per Unit
1900	USD	each

Other Machinery and Equipment - Sewage Drainage Pump. Self-priming non-clogging sewage drainage pump for waste liquids. ZW Series self-priming non clogging sewage pump is an high-efficiency pump that combines self-priming function and non-clogging sewage drainage.

Quantity	Units	Frequency
500	each	Month
Price	Funds	Per Unit
1600	USD	each

Other Machinery and Equipment - IS,ISR,IH horizontal single stage end suction centrifugal pump. Horizontal end suction single stage centrifugal pump Single stage single suction cantilever structure, (The impeller is directly installed on the pump shaft and has only one suction port), International standard ISO2858 design for the centrifugal pump IS pumps are usually made of cast iron and the pumps are mainly used to transport clean water. IS pumps are widely used in urban water supply, industrial cooling water systems, agricultural irrigation, fire water supply and other fields. IR pump adopts a high-tech resistant mechanical seal to transport high-tech fluids such as hot water up to 120 degrees Celsius IH pumps are usually made of stainless steel SUS304 or SUS316 or duplex stainless steel and the pumps are mainly used to transport chemical fluids in Industries such as chemical, pharmaceutical, food processing, and seawater desalination etc.

Quantity	Units	Frequency
500	each	Month
Price	Funds	Per Unit
2050	USD	each

Other Machinery and Equipment - Hot oil circulating pump for thermal fluids heating system. RY Hot oil circulating pump for thermal fluids heating system Horizontal, Single stage single suction cantilever foot support structure, the inlet of pump is axial suction, the outlet is vertical upward. The pump is installed on the baseplate together with the motor. Double end ball bearing support with the front end with lubricating oil and the rear end lubricated with lubricating grease. There is a guide pipe in the middle for observing the sealing recovering thermal oil, Air-cooled for natural heating dissipation The combination of packing seal and mechanical seal is adopted. High-temperature resistant packing seal and hard alloy mechanical seal for the good sealing under high temperature conditions. PTFE lip seal. The pump is used to transfer high temperature liquids without solid particles. The fluids temperature up 350 degrees Celsius. Pump material: cast iron, stainless steel etc. Application Widely used in hot oil furnace oil supply circulation systems ! and hot oil heating circulation systems in industries such as petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food, and machinery etc.

Quantity	Units	Frequency
500	each	Month
Price	Funds	Per Unit
1950	USD	each

Other Machinery and Equipment - Ihf Ns High Temperature Fluorine Plastic Centrifugal Chemical Transfer Pump. IHF-NS high-temperature fluoroplastic centrifugal chemical transfer pump Single stage, single suction, cantilever centrifugal pump. The pump body is made of corrosion-resistant and wear-resistant non-metallic materials such as metal shell lined with fusible polytetrafluoroethylene (PFA) and fluorine ceramic alloy. The impeller and pump cover are made of metal inserts wrapped with fusible polytetrafluoroethylene (PFA) and pressed with fluorine ceramic alloy. Designed according to the international standard ISO2858 - The mechanical seal adopts a built-in water-cooling double end mechanical seal. Widely used in the transportation of highly corrosive media with a solid content of less than 15%, easily crystallized saturated solutions, strong alkalis, and other materials, suitable for continuous operation at a working temperature of 150 degrees Celsius. Suitable industries: acid and alkali production, saturated electrolytes in non-ferrous metal smelting, desulfurization and dust removal in the environmental protection industry, acid pickling and acid regeneration in the steel industry, etc.

Quantity	Units	Frequency
500	each	Month
Price	Funds	Per Unit
850	USD	each

Other Machinery and Equipment - YCB External Gear Oil Pump. The gear in the circular arc gear oil pump adopts the tooth profile compounded by advanced circular arc and other curves, so the pump has excellent working characteristics. The pump is compared with the traditional Involute gear oil pump; It is a new series of energy-saving pumps with the advantages of small pressure fluctuations, low noise, high efficiency, and long service life. YCB gear oil pump gear adopts double circular arc Sine wave tooth profile. Compared with Involute gear, its most outstanding advantage is that there is no relative sliding of the tooth profile during gear meshing, so the tooth surface is free of wear, running balance, no trapping, low noise, long life and high efficiency. This pump breaks free from the constraints of traditional design, allowing gear pumps to enter a new field in design, production, and use. The pump shaft end seal is designed in two forms: mechanical seal and packing seal. Users can choose according to their requirements Equipped with a differential pressure safety valve as overload protection, the total return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted separately within the allowable discharge pressure range according to actual needs. However, this safety valve cannot be used as a pressure reducing valve for long-term operation, and can be installed separately on the pipeline if necessary. YCB gear oil pump application: It can be used as transmission and Booster pump in oil transmission system. It can be used as a fuel pump for transportation, pressurization, and injection in the oil transportation system. It can be used as a lubricating oil pump in all industrial fields. Application scope of YCB gear oil pump: YCB gear oil pump is suitable for conveying lubricating oil without solid particles and fibers, corrosiveness, temperature not higher than 80 degree celsius, viscosity of 5 to 1500cst or other liquids similar to lubricating oil.

Quantity	Units	Frequency
500	each	Month
Price	Funds	Per Unit
300	USD	each

Other Machinery and Equipment - Chlf Light Duty Horizontal Multistage Stainless Steel Pump. Non-self-priming centrifugal pump is equipped with a lengthened shaft motor and maintenance free mechanical seal. The compact structure makes the pump size very small with axial inlet and radial outlet. Light duty multi-section multi-stage centrifugal pump is made of stainless steel material (304 or 316) and it has low noise, light corrosion resistance, beautiful appearance, small size, light weight, long service life, no leakage, smooth operation, and simple and reasonable structure. Scope of application: CHL, CHLK and CHLF (T) type light duty multistage centrifugal pumps are mainly used for household central air conditioning circulation and industrial liquid transmission such as demineralized water, soft water, purification system, light oil and other circulation and pressurization. 1) Small central air conditioning cycle 2) Cooling system 3) industrial cleaning 4) Water treatment (water purification) 5) Aquaculture 6) Fertilization/metering system 7) Environmental applications Working conditions: A liquid that is thin, clean, non-condensable, nonexplosive, and contains no solid particles or fibers. Liquid temperature: normal temperature -15 to 70degree celsius. Hot water type +70 to +110degree celsius; Maximum ambient temperature: +40℃ Maximum operating pressure: 10 bar The maximum inlet pressure is limited by the maximum operating pressure Medium acidity and alkalinity: pH4 to 9 Pumped liquid: 1 - Thin, clean, non-flammable and explosive liquid without solid particles or fibers. 2, pump can transport such as mineral water, softened water, pure water, oil and other light chemical medium. 3, when the conveying liquid density or viscosity is greater than water, if necessary, must be equipped with high-power motor. 4 - Whether the pump is suitable for a particular liquid is determined by a variety of factors, the most important of which is the chlorine content, pH value, temperature and solubility, oil content, etc. motor fully enclosed, air-cooled motor Protection class: IP55 Insulation grade: F Standard voltage, 50 hz: 1 x 220-240 - v 3 x 220-240 - v 380-415V